Core Material used in DER-717 15 W Adapter using InnoSwitch3-CE with ±30 kV ESD Capability
Posted by: powerlion
on
Could you please clarify what core material was used for this design? The core shape is clear but I couldn't see a part number for the core.
Thanks!
Comments
The web site I showed you in the first post was for the bobbin manufacturer. We at PI actually procure the cores from A-Core Jiagmen Electronic, CO, LTD in China
Website: acore-ferrite.com
We are using their JPP 95 material
Thanks for the update, core material i.e. "JPP 95" is what I was looking for.
The core used was an ATQ17.5/11.5. Vendor TBI from Taiwan.
Website: https://tbi-tw.com/